KiCad files (zipped)

I made two mistakes with this KiCad project:

  1. I forgot to add the 200k ohm resistor R18 (see the 2005A schematic) to the board, and I also forgot to add a test point connection equivalent to the oven’s Pin 6. One solution is to bodge a 200k resistor to the bottom of the board and then connect that resistor to the eyelet that Pin 6 of the oven connects to.
  2. The cathodes of the diodes are silkscreened as “+” and they have a circle around them. Amateur mistake, just be wary.